Mazda BT-50 Steel Braided Brake Line Kit

SUPERCIRCUIT Steel Braided Brake Line Kit made for the Mazda BT-50 truck out performs the braking response and stop the car in all kind of conditions than the factory fitted rubber brake hoses. 

Below are the comparisons between the Mazda BT-50 factory fitted rubber brake hoses and after the SUPERCIRCUIT steel braided brake hoses is installed. 

<FRONT>

The factory fitted Mazda BT-50 rubber brake hose shown below. Rubber brake hoses tend to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

No surprise many owners who are after better braking response and stopping power opt for the steel braided brake lines. Picture below shows the SUPERCIRCUIT steel braided brake hose installed to the front left side of the Mazda BT-50. 

<REAR>

Both the rubber brake hoses at the rear of the Mazda BT-50 are located at the left side of the rear axle.

It is replaced with SUPERCIRCUIT Steel Braided ones. (BELOW) The Teflon inner hose is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

All SUPERCIRCUIT Steel Braided Brake Hoses are made according to the OEM fittings and it is 100% compatible with the vehicle Anti-lock Braking System. The closeup photos show how robust the SUPERCIRCUIT Steel Braided Brake Line's fittings are compared to the OEM rubber fittings (BELOW).

All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Mazda BT-50 steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Subaru XV Steel Braided Brake Line Kit

SUPERCIRCUIT Steel Braided Brake Hoses Kit made for the Subaru XV (or called Subaru XV Crosstrek in some countries) will greatly improves the braking response and stopping distance for this fulltime four wheel drive model.

Below are the photos of the Subaru XV rubber brake hoses and replaced with the SUPERCIRCUIT steel braided ones after that.

<FRONT>

The front ventilated disc brake of the Subaru XV (SEE BELOW). Note the factory stock brake hoses are made of rubber. Rubber brake hoses tend to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

Replacing the Subaru XV front rubber brake hose with SUPERCIRCUIT steel braided brake hose (PICTURE BELOW) for better braking response, shorter braking distance and eliminates brake fading under severe braking conditions e.g. down hill, carrying heavy load etc.

<REAR>

The Subaru XV comes with solid disc brake and rubber brakes hoses as standard at the rear (SEE BELOW).

The rubber brake hose at the rear of the Subaru XV is replaced with SUPERCIRCUIT Steel Braided one. (BELOW) The Teflon inner hose is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Subaru XV Crosstrek steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Perodua Myvi 1.5 Steel Braided Brake Line Kit

Engineered in the USA, the SUPERCIRCUIT Steel Braided Brake Hoses specially developed for the local Perodua Myvi 1.5.

Great improvement on the braking response and stopping distance for the Perodua Myvi 1.5.

Below are the photos of the Perodua Myvi 1.5 rubber brake hoses and the SUPERCIRCUIT steel braided ones.

<FRONT>

Perodua Myvi 1.5 with front vantilated disc brake comes with rubber brake hoses as standard. Rubber brake hoses tend to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

Factory stock standard rubber brake hose of the Perodua Myvi 1.5 shown below.

We replaced it with the SUPERCIRCUIT Steel Braided Brake Hose for better braking and firmer braking response. The braking will not fade under severe braking conditions. The Teflon inner hose is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

<REAR>

The rear drum brake for the Perodua Myvi 1.5 deserves better braking performance too! So we also replaced the factory stock rubber brake hoses to full steel braided ones from SUPERCIRCUIT.

The rear rubber brake hoses are situated above the semi-trailing arm/ rear solid axle of the Perodua Myvi 1.5.

  

All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system such as the anti-lock braking system (ABS) with electronic brakeforce distribution (EBD) and brake assist (BA) on the more expensive Premium X, SE and Advance Perodua Myvi models .

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Perodua Myvi 1.5 steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Mazda Lantis Steel Brake Hoses

The SuperCircuit Steel Braided Brake Line Kit installed to the Mazda Lantis (model year 1993-1996, CB platform) 5-door hatchback.

The SuperCircuit Stainless steel braided brake lines improve your braking performance with a quicker, firmer and consistent pedal response over a wide range of driving conditions.

They are engineered in the USA and are 100% street legal and compliant to the strictest requirement in the USA. Suitable for dynamic driving and competition!

<MAZDA LANTIS FRONT WHEEL>

The stock rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

SuperCircuit steel braided brake lines are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses. SuperCircuit steel braided brake hose installed to the Mazda Lantis front (below).

<MAZDA LANTIS FRONT WHEEL>

The factory stock breke hose for the rear of Mazda Lantis is made with rubber. The average life of the rubber brake hoses is 5-6 years, so it is better to check the condition of the rubber brake hose after a while, look for symptom such as swelling, cracks, chafing etc., before it is too late.

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions especially under the overheating brake fluid conditions.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Mazda Lantis steel braided brake hoses, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Honda Civic Type-R Steel Braided Brake Line Kit

We have just installed a set of SuperCircuit Steel Brake Hose Kit to the Honda Civic FD2 Type-R.

Here are the photos during the Honda Civic FD2R brake hoses installation and some close up details of the SuperCircuit steel brake hose fittings of the Honda Civic FD2 Type-R.

<HONDA CIVIC TYPE-R FRONT BRAKE>

The stainless steel braided brake lines improve your braking performance with a quicker, firmer and consistent pedal response over a wide range of driving conditions.

100% street legal, compliant to the strictest requirement in the USA. suitable for dynamic driving and competition!

The Stainless Steel Braided Layer provides high strength over the PTFE Teflon core, to prevent further expansion under extreme pressure, incidental impact or compression.

All SuperCircuit steel braided brake hose fittings are plated with Trivalent Zinc material for better anti-corrosive performance under all kind of driving conditions.

<HONDA CIVIC TYPE-R REAR BRAKE>

All fittings and brackets are 100% compatible with the OEM braking system to ensure safe and confident braking under all circumstances and conditions.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with LIFETIME WARRANTY*. 

For more information about the above Honda Civic Type-R steel brake hose kit, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Proton Suprima S Steel Braided Brake Line Kit

The lifetime warrant* Proton Suprima S steel braided brake line kit is now available at SuperCircuit Exhaust Pro Shop or its authorized dealer.

Under most driving conditions, the USA engineered SuperCircuit steel braided brake hose gives more feedback and better braking response against the factory fitted rubber brake hose.

<Proton Suprima S Front Brake Hoses>

The front braking system of Proton Suprima S comes with ventilated disc brake.

Rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

The USA engineered steel braided brake lines from SuperCircuit are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses.

<Proton Suprima S Rear Brake Hoses>

Rear solid disc brake for the Proton Suprima S.

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions e.g. overheating brake fluid.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Proton Suprima S steel braided brake hoses, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Steel Braided Brake Line Kit for Mercedes Benz E-class (W210)

We have the steel braided brake line kit for Mercedes Benz E-class 1996-2003 (W210) model.

The front wheel is removed to access to the brake hose. Stock factory fitted rubber brake hose tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently. 

The Mercedes Benz E-class factory stock rubber hose is shown below.

For better braking performance of your E-class, replace it with SuperCircuit steel braided brake lines. Steel braided brake lines will help to eliminate brake pedal sponginess, firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

The rear rubber brake hose is shown below. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.