Subaru XV Steel Braided Brake Line Kit

SUPERCIRCUIT Steel Braided Brake Hoses Kit made for the Subaru XV (or called Subaru XV Crosstrek in some countries) will greatly improves the braking response and stopping distance for this fulltime four wheel drive model.

Below are the photos of the Subaru XV rubber brake hoses and replaced with the SUPERCIRCUIT steel braided ones after that.

<FRONT>

The front ventilated disc brake of the Subaru XV (SEE BELOW). Note the factory stock brake hoses are made of rubber. Rubber brake hoses tend to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

Replacing the Subaru XV front rubber brake hose with SUPERCIRCUIT steel braided brake hose (PICTURE BELOW) for better braking response, shorter braking distance and eliminates brake fading under severe braking conditions e.g. down hill, carrying heavy load etc.

<REAR>

The Subaru XV comes with solid disc brake and rubber brakes hoses as standard at the rear (SEE BELOW).

The rubber brake hose at the rear of the Subaru XV is replaced with SUPERCIRCUIT Steel Braided one. (BELOW) The Teflon inner hose is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Subaru XV Crosstrek steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Subaru Impreza GR Hatchback (non-Brembo) Steel Braided Brake Line Kit

If your Subaru Impreza Hatchback (GR) STI widebody version is the base model and doesn't come with the Brembo brake calipers. No worries, you still can improve the braking performance with a set of steel braided brake hoses from SuperCircuit!

<FRONT>

The original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

SuperCircuit Steel Braided Brake Hose installed to the front of the Subaru Impreza hatchback, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a high performance model.

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. No hanging and dangling here.

<REAR>

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. No hanging and dangling means maximum safety and durability is ensured.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Subaru Impreza WRX STI 4-door Sedan (GV) Steel Braided Brake Line Kit

We have installed a set of SuperCircuit Steel Braided Brake Line Kit to the Subaru Impreza WRX STI 4-door Sedan (GV) which comes with the STI Brembo calipers.

The Subaru Impreza WRX STI original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

The Subaru Impreza WRX STI front factory fitted rubber brake hose shown below.

SuperCircuit Steel Braided Brake Hose installed to the front of the Subaru Impreza WRX STI sedan, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a high performance model.

Equally important is the rear braking system of this Subaru Impreza WRX STI sedan. We replaced the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system and Brembo calipers.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Subaru Impreza WRX STI Steel Braided Brake Line Kit

The high performance Subaru Impreza WRX STI (Version 8 GD, GG) accelerates fast and need to stop fast too!

SuperCircuit Steel Braided Brake Line Kit for Subaru Impreza WRX STI (GD, GG) with Brembo calipers is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.

<SUBARU IMPREZA WRX STI FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Subaru Impreza WRX STI are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Note the SuperCircuit Steel Braided Brake Hose for Subaru Impreza WRX STI front braking system is tighten and secured to the factory original brake hose braket, it is important that the brake hose is not rubbing against any moving component here!

<SUBARU IMPREZA WRX STI REAR BRAKE HOSES>

Equally important at rear. Replaces the factory stock rubber brake hoses with SUPERCIRCUIT steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

SuperCircuit Steel Braided Brake Line Kit is 100% compatible with the factory stock braking system and shock suspension system. So everything is installed and tighten to the original location to avoid mishandling and minimize the risk of brake failure e.g. the bracket is included in the middle of the SuperCircuit steel braided brake hose, so you can fasten it to the brake hose holder like original.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.