Renault Megane III RS Steel Braided Brake Lines

We have installed the SUPERCIRCUIT Steel Braided Brake Lines to the 3rd generation Renault Megane RS (2009-2017). The steel braided brake lines by SUPERCIRCUIT improve the braking responsiveness and also minimize brake fading under hard braking conditions.

<FRONT>

The Renault Megane III RS's front wheels are removed in order to access to the front brake hoses. The Renault Megane III RS front braking system comes with BREMBO calipers & ventilated brake rotors as shown in the picture below.

The stock factory fitted rubber brake hose tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently or swap it with a steel braided one. 

The Renault Megane III RS original rubber brake hose (picture above) is replaced with the SUPERCIRCUIT Steel Braided Brake Lines for better braking response and improved stopping performance!

The stainless steel braided layer on top of the PTFE Teflon core of SUPERCIRCUIT brake lines prevents further expansion under extreme pressure, hence better braking response and consistent braking performance under hard braking conditions.

<REAR>

The rear side of the Renault Megane III RS, which is a solid brake rotor setup as shown in the picture below.

The factory stock rubber brake hoses can be found at the rear axle, after the rear wheels are removed, as shown in the picture below.

The factory stock rear rubber brake hose is replaced with the SUPERCIRCUIT steel braided brake hoses, for better braking response and consistent braking performance.

The SUPERCIRCUIT Steel Braided Brake Hose Kit is designed for direct replace with the factory stock orignal rubber brake hose, no mod is required.

Contact us at the SUPERCIRCUIT for more information or to make a booking for installation. Tel: 03 5632 2855 or 'LIKE' and follow our Facebook Page for more production updates and information.