Mazda BT-50 Steel Braided Brake Line Kit

The full front and rear steel braided brake line kit from SuperCircuit installed to the Mazda BT-50 below.

<INSTALLING THE FRONT MAZDA BT-50 BRAKE HOSE>

Replacing the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess. The steel braided brake hoses provide firmer and more immediate brake response to your Mazda BT-50 braking performance.

Mazda BT-50 front factory stock rubber brake hose shown below.

Mazda BT-50 stock rubber brake hose and fitting.

All SuperCircuit steel braided brake line fittings are engineered in the USA with stringent quality control to ensure top safety.

Mazda BT-50 front brake with SuperCircuit steel braided brake hose installed (see below). The SuperCircuit steel braided brake line kits are 100% OEM compatible and fits nicely to the factory stock brackets. 

SuperCircuit steel braided brake line fittings for the Mazda BT-50 front brake shown below.

 

 <INSTALLING THE REAR MAZDA BT-50 BRAKE HOSE>

You can find the two rear brake hoses of the Mazda BT-50 above the rear axle as shown in the photo below.

SuperCircuit steel braided brake hoses installed to the rear of Mazda BT-50 below.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Mazda BT-50 steel braided brake hose kit, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Mazda Lantis Steel Brake Hoses

The SuperCircuit Steel Braided Brake Line Kit installed to the Mazda Lantis (model year 1993-1996, CB platform) 5-door hatchback.

The SuperCircuit Stainless steel braided brake lines improve your braking performance with a quicker, firmer and consistent pedal response over a wide range of driving conditions.

They are engineered in the USA and are 100% street legal and compliant to the strictest requirement in the USA. Suitable for dynamic driving and competition!

<MAZDA LANTIS FRONT WHEEL>

The stock rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

SuperCircuit steel braided brake lines are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses. SuperCircuit steel braided brake hose installed to the Mazda Lantis front (below).

<MAZDA LANTIS FRONT WHEEL>

The factory stock breke hose for the rear of Mazda Lantis is made with rubber. The average life of the rubber brake hoses is 5-6 years, so it is better to check the condition of the rubber brake hose after a while, look for symptom such as swelling, cracks, chafing etc., before it is too late.

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions especially under the overheating brake fluid conditions.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Mazda Lantis steel braided brake hoses, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Steel Braided Brake Hose for Mazda BT-50 (2011-present)

We have the steel braided brake line kit for the new Mazda BT-50. Below are the installation scene:

Mazda BT-50 front steel brake hose replacement in progress.....

Mazda BT-50 front rubber brake hose. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Mazda BT-50 front steel braided brake hose by SuperCircuit installed. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.

Mazda BT-50 rear spare wheel is removed to access to the rear braking system.

Stock rubber brake hoses for Mazda BT-50 rear side.

Steel Braided Brake Lines for Mazda BT-50 rear side.

Replaced with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.