Honda Civic (FB) Hybrid Steel Braided Brake Line Kit

SuperCircuit Honda Civic Hybrid (FB) Steel Braided Brake Line Kit is now available through the SuperCircuit dealers nationwide.

The Civic Hybrid has a regenerative braking system that works with the Integrated Motor. When braking the load of the Integrated Motor slows the vehicle down and at the same time generating the load into electricity. It is This energy is then stored in the battery for future use. Friction brakes add additional stopping power as necessary and for low speeds braking.

Beside the assisted braking, the integrated motor loading and advanced hydraulic booster thingy. The brake fluid on the Honda Civic Hybrid (FB) is still transmitting via the rubber brake hoses to the brake calipers.

<Honda Civic Hybrid Front Brake Hoses>

Rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

SuperCircuit steel braided brake lines are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses.

The SuperCircuit steel braided brake hose (below) gives more feedback and more responsive against the factory fitted rubber brake hose (above).

<Honda Civic Hybrid Rear Brake Hoses>

The rear braking system is equally important on the Honda Civic Hybrid.

 A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions e.g. overheating brake fluid.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about Honda Civic Hybrid steel braided brake hoses, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Nissan X-trial Steel Braided Brake Lines

SuperCircuit steel braided brake hoses are now available for Nissan X-trial 2.0L/ 2.5L. Please check them out at SuperCircuit Sunway or its authorized dealers.

<INSTALLING THE NISSAN X-TRAIL FRONT BRAKE HOSES>

Replacing the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess. The steel braided brake hoses provide firmer and more immediate brake response to your Nissan X-trial braking performance.

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions e.g. overheating brake fluid.

<INSTALLING THE NISSAN X-TRAIL REAR BRAKE HOSES>

Rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Nissan X-trial steel braided brake hose kit, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

BMW M6 (E63/64) Steel Braided Brake Hose

SuperCircuit Steel Braided Brake Line Kit for the 500hp BMW M6 (E63/64) is installed and available through the SuperCircuit dealers network nationwide.

<BMW M6 Front Brake Hoses>

Rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

SuperCircuit steel braided brake lines are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses.

BMW M6 Steel braided brake hose (below) gives more feedback and more responsive against the factory fitted rubber brake hose (above).

<BMW M6 Rear Brake Hoses>

The rear braking system is equally important in bringing the over 1700kg BMW 6-series to come to a stand still. One of the braking component that you will not miss out is to upgrade the rubber brake hose to a steel braided one.

Rear rubber brake hose of the factory stock BMW M6 shown below.

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions e.g. overheating brake fluid.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about BMW steel braided brake hoses, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Suzuki Swift 1.5 Steel Braided Brake Line Kit

The SuperCircuit Steel Braided Brake Line Kit for second generation Suzuki Swift 1.5 (front disc/rear drum) installed.

The Suzuki Swift 1.5 factory fitted brake hoses are made of rubber. Rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.

SuperCircuit steel braided brake lines are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses.

<SUZUKI SWIFT FRONT STEEL BRAIDED BRAKE HOSE>

Steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose.

<SUZUKI SWIFT REAR STEEL BRAIDED BRAKE HOSE>

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions e.g. overheating brake fluid.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Audi S5 Steel Braided Brake Line Kit

SuperCircuit Steel Braided Brake Line Kit for Audi S5 is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.

Below are the photos of the Before & After the steel braided brake hoses are installed to the Audi S5.

<INSTALLING THE AUDI S5 FRONT BRAKE HOSES>

Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

<INSTALLING THE AUDI S5 REAR BRAKE HOSE>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota Corolla Altis (E120) Steel Braided Brake Line Kit

SuperCircuit Steel Braided Brake Line Kit for the 9th generation Toyota Corolla Altis (NZE120/ZZE120) is installed below. 

<TOYOTA COROLLA ALTIS FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Corolla Altis are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Front rubber brake hose of the Toyota Corolla Altis shown below.

SuperCircuit steel braided brake hose is installed to the front wheel of this Toyota Corolla Altis. All SuperCircuit brake hose fittings are 100% compatible with the factory stock braking system for maximum safety and reliability.

<TOYOTA COROLLA ALTIS REAR BRAKE HOSES>

Equally important are the rear braking system. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Subaru Impreza WRX STI Steel Braided Brake Line Kit

The high performance Subaru Impreza WRX STI (Version 8 GD, GG) accelerates fast and need to stop fast too!

SuperCircuit Steel Braided Brake Line Kit for Subaru Impreza WRX STI (GD, GG) with Brembo calipers is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.

<SUBARU IMPREZA WRX STI FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Subaru Impreza WRX STI are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Note the SuperCircuit Steel Braided Brake Hose for Subaru Impreza WRX STI front braking system is tighten and secured to the factory original brake hose braket, it is important that the brake hose is not rubbing against any moving component here!

<SUBARU IMPREZA WRX STI REAR BRAKE HOSES>

Equally important at rear. Replaces the factory stock rubber brake hoses with SUPERCIRCUIT steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

SuperCircuit Steel Braided Brake Line Kit is 100% compatible with the factory stock braking system and shock suspension system. So everything is installed and tighten to the original location to avoid mishandling and minimize the risk of brake failure e.g. the bracket is included in the middle of the SuperCircuit steel braided brake hose, so you can fasten it to the brake hose holder like original.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.