BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Friday, October 18, 2013

Mazda MX-5 (NC) Steel Braided Brake Line Kit

SuperCircuit Steel Braided Brake Line Kit for Mazda MX-5 (NC) is available through SuperCircuit or its authorized dealers nationwide.



INSTALLING SUPERCIRCUIT STEEL BRAIDED BRAKE LINES TO THE FRONT WHEELS OF MAZDA MX-5


Stock front brake hoses of the MX-5 are made of rubber. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.





Mazda MX-5 front stock rubber brake hoses are changed to steel braided ones from SuperCircuit. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.




INSTALLING SUPERCIRCUIT STEEL BRAIDED BRAKE LINES TO THE REAR WHEELS OF MAZDA MX-5


It is an important part of the whole braking system which contributes significant braking performance. Even after you have upgraded to a better rotors, be it slotted or cross drilled, or even you have a set of high performance brake pads, without a set of good steel braided brake lines, you don't get the full out of your braking system!







Replaced with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

No comments:

Post a Comment