Subaru Impreza GR Hatchback (non-Brembo) Steel Braided Brake Line Kit

If your Subaru Impreza Hatchback (GR) STI widebody version is the base model and doesn't come with the Brembo brake calipers. No worries, you still can improve the braking performance with a set of steel braided brake hoses from SuperCircuit!

<FRONT>

The original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

SuperCircuit Steel Braided Brake Hose installed to the front of the Subaru Impreza hatchback, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a high performance model.

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. No hanging and dangling here.

<REAR>

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. No hanging and dangling means maximum safety and durability is ensured.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Kia Optima (MG) Steel Braided Brake Line Kit

We have installed quite a few numbers of SUPERCIRCUIT Steel Braided Brake Line Kit to the Kia Optima K5. Here is the second generation Kia Optima MG (model year 2005-2010).

<Kia Optima MG Front Brake Hose Installation>

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface. Kia Optima MG front rubber brake hose shown below:

SUPERCIRCUIT steel braided brake hose installed to the Kia Optima MG below:

<Kia Optima MG Rear Brake Hose Installation>

The factory fitted rubber brake hose of the Kia Optima GM shown below:

SUPERCIRUCIT Steel Braided Brake Line Kit is designed to be 100% OEM compatible with the Kia Optima GM rear braking system.

The SuperCircuit steel braided brake line kit for the second generation Kia Optima (MG) is made with TEFLON inner core, steel braided middle layer and then poly-coated outer layer for maximum durability and safety under harsh conditions. 

For every piece of SuperCircuit steel braided brake hose is tested at 3000psi to ensure flawless product (most car booster-assisted braking system or master pump can reach pressures of approximately 1500psi).

For more information, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Subaru Impreza WRX STI 4-door Sedan (GV) Steel Braided Brake Line Kit

We have installed a set of SuperCircuit Steel Braided Brake Line Kit to the Subaru Impreza WRX STI 4-door Sedan (GV) which comes with the STI Brembo calipers.

The Subaru Impreza WRX STI original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

The Subaru Impreza WRX STI front factory fitted rubber brake hose shown below.

SuperCircuit Steel Braided Brake Hose installed to the front of the Subaru Impreza WRX STI sedan, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a high performance model.

Equally important is the rear braking system of this Subaru Impreza WRX STI sedan. We replaced the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system and Brembo calipers.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

VW Golf 7 1.4 TSI Steel Braided Brake Line Kit

The SuperCircuit Steel Braided Brake Line Kit for the VW Golf 7 1.4TSI is now available at SuperCircuit Exhaust Pro Shop or through its dealer nationwide.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.).

The VW Golf 7 1.4 TSI front rubber brake hose show below:

The SuperCircuit Steel Braided Brake Hose for VW Golf 7 1.4TSI installed to the front wheel. Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

The VW Golf 7 1.4 TSI rear rubber brake hose show below:

The VW Golf 7 1.4 TSI rear brake hose replaced with a steel braided one below:

All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system, brake mater pump and stock calipers.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Honda Civic FD2R Steel Braided Brake Line Kit

Yet another Honda Civic Type-R (FD2R) installed the full set of SuperCircuit Steel Braided Brake Line Kit for better braking performance.

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Honda Civic Type-R are made of rubber (see below photos). Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

SuperCircuit Steel Braided Brake Hose installed to the front of the Honda Civic Type R  with Brembo calipers (see below). All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system and Brembo calipers.

Equally important at rear braking system of this Honda Civic Type-R. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

 

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Datsun/ Nissan Sunny 130Y (B11) Steel Braided Brake Hose

Datsun/ Nissan Sunny 130Y (B11) produced in between 1981-1985 is definitely need to change the original rubber brake hose by now.

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface.

Datsun/ Nissan Sunny 130Y front original brake hose made of rubber, it is time to change.

SuperCircuit steel braided brake hose for Datsun/ Nissan Sunny 130Y installed.

Datsun/ Nissan 130Y Rear factory rubber brake hose is equally important.

The original Nissan Sunny 130Y rear rubber brake hose is just a short piece located near to the rear trailing arm (see below).

The SuperCircuit Steel Braided Brake Hose made of Teflon inner hose, wrapped by stainless steel braided middle section and then coated with PVC, minimized the weakness of the rubber brake hose. It also response faster and more consistent under heavy braking or panic braking conditions.

SuperCircuit Steel Braided Brake Hose for the 1981-1985 Datsun/ Nissan Sunny 130Y is installed to all the four wheels above.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook for more updates.

* T&C applies.

Mazda BT-50 Steel Brake Hoses

Yet another Mazda BT-50 installed with the SuperCircuit Steel Braided Brake Hoses. The steel braided brake hoses provide firmer and more immediate braking response to your Mazda BT-50.

Mazda BT-50 front factory stock rubber brake hose shown below.

Mazda BT-50 front brake installed with SuperCircuit steel braided brake hose. This is the black coloured steel brake hose special edition. The SuperCircuit steel braided brake line kits are 100% OEM compatible and fits nicely to the factory stock brackets. 

Mazda BT-50 rear brake installed with SuperCircuit black edition steel braided brake hose.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Mazda BT-50 steel braided brake hose kit, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.