Honda CR-Z Steel Braided Brake Line Kit

  SuperCircuit has developed the Steel Braided Brake Line Kit for Honda CR-Z Hybrid.

Honda CR-Z factory stock brake system with rubber brake hose....

Average life span of factory fitted rubber brake hose is around 5-6 years. Rubber brake hoses deteriorates faster under high operation temperature e.g. down hills, heavy braking etc.

 Factory fitted Honda CR-Z rubber brake hose....

Replaced with Teflon core, steel braided brake line. Note the SuperCircuit steel braided brake line bracket is 100% OEM compatible and fasten back to the original brake hose holding bracket (shown here is the after market suspension without the original holding bracket).

Rear Honda CR-Z braking system....

... with factory fitted rubber brake hose.

SuperCircuit stainless steel braided brake line kit for Honda CR-Z provides immediate braking response, better braking performance under load conditions and heavy braking. Significantly improve braking safety.

Product is 100% imported from the USA with limited LIFETIME WARRANTY.

For more information, please contact SuperCircuit Exhaust Pro Shop, 03 5632 2855 or 'LIKE' us on Facebook.

VW Golf 6 GTI at SuperCircuit Exhaust Pro Shop for the brake lines upgrades....

The VW Golf 6 GTI front braking system with factory fitted brake hoses.

Factory fitted stock rubber brake hose will have an average life of six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

SuperCircuit steel braided brake line for the VW Golf 6 GtI front braking system. It is made with Teflon inner hose, wrapped by stainless steel braided middle section and then poly-coated for maximum protection against stone chips, wear and tear, corrosion etc., minimizes the weakness of the rubber brake hose to the minimum.

Factory fitted rubber brake hose and the connection to the Golf 6 GTI front brake caliper....

Replaced with SuperCircuit Steel Braided Brake Line, 100% OEM compatible. Fitted nicely back to the Golf 6 GTI front braking caliper.

VW Golf 6 GTI rear brake system with stock rubber brake hoses....

Stock rubber brake of the VW Golf 6 GTI rear brake system.  

Stainless steel braided brake line from SuperCircuit at the rear. 100% OEM compatible and conforming to all DOT brake fluid range.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway. Tel: +6 03 5632 2855 or join our facebook page: SuperCircuit steel Braided Brake Lines.

Nissan Fairlady 350Z Steel Braided Brake Line Kit

Nissan Fairlady 350Z ST version, with Brembo brake calipers all around, is getting the factory stock rubber brake hoses exchanged with SuperCircuit Steel Braided Brake Lines.

The Nissan Fairlady 350Z ST version comes with Brembo 4-pot caliper for the front.

Factory fitted stock rubber brake hose will have an average life of six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. 

Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

SuperCircuit steel braided brake line for Nissan Fairlady 350Z front brake system installed.

It is with Teflon inner hose, wrapped by stainless steel braided middle section and then coated with PVC, minimized the weakness of the rubber brake hose and significantly improve braking performance.

Nissan Fairlady 350Z Version ST comes with rear brembo braking system as standard....

 But the standard brake hose is made of rubber. 

So we installed the SuperCirciut Steel Braided Brake Line to it, for better braking performance.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i., best of all, it comes with lifetime warranty*.

For more information, please contact us at SuperCircuit Exhaust Pro Shop, Sunway. Tel: +6 03 5632 2855 or join our facebook page - SuperCircuit Steel Braided Brake lines.

Proton Inspira Steel Braided Brake Line Kit

SuperCircuit steel braided brake line kit for Proton Inspira, will also fit Mitsubishi Lancer 2.0.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i., best of all, it comes with lifetime warranty*.

Front Proton Inspira brake system....

Factory fitted stock rubber brake hose will have an average life of six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

 SuperCircuit steel braided brake hose, with Teflon inner hose, wrapped by stainless steel braided middle section and then coated with PVC, minimized the weakness of the rubber brake hose.

Do you know that your Proton Inspira/ Mitsubishi Lancer has 6 sections of rubber brake hose around? Each 1 piece for the front wheels, and 2 pieces for the rear left and rear right wheels respectively.

Proton Inspira/ Mitsubishi Lancer rear brake system comes in 2 sections. This is the 1st section of the stock factory fitted rear rubber brake hose.

Many has omitted this middle brake hose section which located just behind the rear axle. These rubber brake hoses will also has the possibility of contribute to the braking failure and should not be omitted.

 .... installed with SuperCircuit steel braided brake line.

The 2nd section of the Proton Inspira/ Mitsubishi Lancer rear brake system system....

Fitted with SuperCircuit steel braided brake line for consistent braking performance and more responsive brake pedal response under wide range of situation e.g. rainy days panic braking, continuously down hill braking etc.

For more information, please contact SuperCircuit Exhaust Pro Shop. Tel: +6 03 5632 2855 or 'like' us in the Facebook.

Perodua Myvi 1.3 (2005-2011) Steel Braided Brake Line Kit

Perodua Myvi 1.3 (First Generation 2005-2011) installed with SuperCircuit Steel Braided Brake Line Kit for consistent braking performance and more responsive brake pedal response under wide range of situation e.g. rainy days panic braking, continuously down hill braking etc.

 

First generation Perodua Myvi 1.3 front brake system....

Stock standard factory fitted rubber hose....

Replaced by SuperCircuit steel braided brake line for better braking performance.

Perodua Myvi 1.3 rear braking system.

Fitted with stock rubber brake hose....

Braking performance will be improved after the SuperCircuit steel braided brake line is installed.

For more information and installation, please contact SuperCircuit Exhaust Pro Shop or 'like' us on Facebook.  Tel: +6 03 5637 2855/ 5632 2855

Proton Satria Neo Steel Braided Brake Line Kit

SuperCircuit steel braided brake line kit for Satria Neo.

Satria Neo front brake system with factory fitted rubber brake hoses will be replaced with SuperCircuit steel braided brake lines....

 Front stock factory fitted rubber brake hose....

SuperCircuit steel braided brake line kit for Satria Neo for better responsive brake pedal, consistent braking performance and many more advantages over the rubber brake hoses..... you have to experience it yourself.

Installation in progress for rear brake system...

Stock factory fitted rubber brake hose tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently. 

For purchase and installation services, please contact SuperCircuit Exhaust Pro Shop, Sunway. Tel: 03 5632 2855/ 5637 2855 or join us in Facebook.

Volkswagen Scirocco Steel Braided Brake Line Kit

Installed the SuperCircuit steel braided brake line kit to the Volkswagen Scirocco 2.0.

 VW Scirocco front stock factory fitted rubber brake hose will be replaced....

Stock rubber brake hose will be replaced with the TEFLON cored, stainless steel braided brake line from SuperCircuit.....

SuperCircuit steel braided brake lines for more responsive brake pedal response, consistent braking performance and many more advantages over the rubber brake hoses..... you have to experience it yourself.

SuperCircuit steel braided brake line kit comes in 4 pieces, for all around braking performance.

VW Scirocco stock standard factory fitted rear rubber brake hose here....

... being replaced by SuperCircuit steel braided brake hose! Direct replacement, no modification required.

For more information, please contact SuperCircuit Exhaust Pro Shop. Tel: +6 03 5632 2855 or join us on Facebook.