Peugeot RCZ Steel Braided Brake Line Kit

With no compromise, the sporty car models need to have similar braking system to match with the acceleration too. Here, we have developed the SUPERCIRCUIT Steel Braided Brake Line Kit for the sporty Peugeot RCZ.

<FRONT>

SuperCircuit Steel Braided Brake Hose installed to the front of the Peugeot RCZ, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a sporty model so the pleasure of driving is not compromised due to poor braking performance.

The original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. We replaced it with an OEM compatible fitting, no hanging and dangling here.

<REAR>

The rear original rubber brake hoses at the Peugeot RCZ is located at both the end of the rear axle (SEE BELOW).

Steel braided brake hoses are more resistant to brake fading. All SUPERCIRCUIT Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking and ABS system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it also comes with Lifetime Warranty*. 

To purchase or for more information regarding the Peugeot RCZ SUPERCIRCUIT Steel Braided Brake Line Kit, please contact us at SS13 SUBANG JAYA INDUSTRIAL ESTATE. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Ford Kuga Steel Braided Brake Lines

The SUPERCIRCUIT Steel Braided Brake Line Kit made for the Ford Kuga improves the braking response and stopping performance of this mini SUV.

This Steel Braided Brake Line Kit is 100% street legal, compliant to the strictest requirements in the USA, a must have performance upgrades for whom who likes dynamic and sporty driving!

<FRONT>

The Ford Kuga factory supplied rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking, hence delayed the braking response.

To counter the shortfall of the rubber brake hoses, the SUPERCIRCUIT Teflon core with braided stainless steel around it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! 

All SUPERCIRCUIT steel braided brake line fittings are engineered in the USA. They are OEM compatible and we do not simply replace it with other shape of fitting or fitting bracket like some of our competitors in the market.

<REAR>

Equally important and not to be missed out, the rear of the Ford Kuga originally comes with two rubber brake hoses are to be replaced with the high performance SUPERCIRCUIT Steel Braided Brake Hoses too!

Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. So, please check your rubber brake hoses frequently or to change it to the very long lasting SUPERCIRCUIT Steel Braided Brake Line Kit.

SUPERCIRCUIT steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*!

For more information about the above SUPERCIRCUIT steel braided brake line kit for the Ford Kuga, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota Vellfire (ANH20) Steel Braided Brake Line Kit

To improve braking performance of such a big luxury MPV, one of the options is to upgrade the brake hoses to a steel braided ones from SUPERCIRCUIT.

Steel braided Brake Hoses provide firm braking, responsive and minimizes brake fading under heavy braking conditions, improves safety on big and luxury MPVs like the Toyota Vellfire (ANH20, 2008-2015) featured here:

The SUPERCIRCUIT Steel Braided Brake Line Kit for the Toyota Vellfire comes in a set of 6 pieces of brake hoses, replacing all the OEM original rubber brake hoses, none of the rubber brake hoses were left out.

<FRONT>

Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. So, please check your rubber brake hoses frequently or to change it to the very long lasting SUPERCIRCUIT steel braided brake line kit.

Toyota Vellfire front braking with SUPERCIRCUIT steel braided brake hose installed (below).

<CENTRE>

For optimum braking performance, the SUPERCIRUCIT steel braided brake hose comprises of 3 layers. The Teflon core and surrounded with stainless steel braided layer ensure it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! The outer PVC coating shields it from elements so it can last for a long time.

Toyota Vellfire centre brake hose replaced with the SUPERCIRCUIT steel braided brake hose (see below).

<REAR>

SuperCircuit steel Braided Brake Lines are engineered in the USA and are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*.

Toyota Vellfire rear braking system matched with the SUPERCIRCUIT Steel Braided Brake hose (below).

To order or for more information about the above SUPERCIRCUIT steel braided brake line kit for the Toyota Vellfire, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota Vios (2007-2013) Steel Braided Brake Line Kit

Under most driving conditions, the SUPERCIRCUIT Steel Braided Brake Hoses give more feedback and better braking response against the factory fitted rubber brake hose. This is due to the Teflon core, which can withstand high temperature and steel woven layer makes the brake hose stays not deform under high braking pressure.

<FRONT>

Factory fitted stock rubber brake hose will have an average life of six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc.

<REAR>

Toyota Vios (XP90, 2007-2013) comes with two different grade. The lower spec-ed Vios show here has drum brake at the rear. 

The factory stock Toyota Vios rear rubber brake hose shown below.

SUPERCIRCUIT Steel Braided Brake Lines, which are engineered in the USA, compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime warranty*.

Replaced the front and rear of the Toyota Vios brake hoses with SUPERCIRCUIT steel braided ones for optimum braking performance.

To purchase or for more information, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the SUPERCIRCUIT Steel Braided Brake Line products.

* T&C applies.

Renault Megane RS 265 Steel Braided Brake Line Kit

The SUPERCIRCUIT Steel Braided Brake Line Kit made for the Renault Magane RS, improves the braking performance of this high performance hatchback significantly.

This Steel Braided Brake Line Kit is 100% street legal, compliant to the strictest requirement in the USA, suitable for dynamic driving and competition!

Here is another Renault Megane R.S. 265 installed with the SUPERCIRCUIT steel braided brake hoses:

<FRONT>

The Renault Megane R.S. 264 front braking system with red Brembo calipers. The factory supplied rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking, hence delayed the braking response.

The Teflon core and surrounded with stainless steel braided brake hose does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! 

The front rubber brake hose (above) of the Renault Megane R.S. 265 is replaced with the SUPERCIRCUIT steel braided brake hose (below).

<REAR>

Not to be missed out, the rear of the Renault Megane R.S. 265 also comes with two short rubber brake hoses connecting the car body and the rear braking system. 

Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. So, please check your rubber brake hoses frequently or to change it to the very long lasting SUPERCIRCUIT steel braided brake line kit.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above SUPERCIRCUIT steel braided brake line kit for the Renault Megane R.S. 265, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota Harrier XU30 Steel Braided Brake Line Kit

The SUPERCIRCUIT Steel Braided Brake Line Kit for the 2nd generation Toyota Harrier (XU30, 2003-2008).

The stainless steel braided brake lines improve your braking performance with a quicker, firmer and consistent pedal response over a wide range of driving conditions.

<TOYOTA HARRIER FRONT BRAKE HOSE>

Factory stock rubber brake hose of the Toyota Harrier (above) tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

SUPERCIRCUIT Steel Braided Brake Hose installed to the Toyota Harrier front brake system (below). The SUPERCIRCUIT steel braided brake hoses are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses.

<TOYOTA HARRIER REAR BRAKE HOSE>

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc.

SUPERCIRCUIT Steel Braided Brake hose installed to the rear of Toyota Harrier (below), all fittings are 100% OEM compatible. Just plug 'n play, no further modification required.

All the SUPERCIRCUIT made steel braided brake lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with LIFETIME WARRANTY!*

For more information about the above Toyota Harrier SUPERCIRCUIT STEEL BRAIDED BRAKE LINES, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook for more updates.

* T&C applies.

Proton Persona Steel Braided Brake Line Kit

The SUPERCIRCUIT Steel Braided Brake Line Kit specially developed for the Proton Persona with rear drum brake version. Please refer to the below photos before and after the steel brake hoses are installed.

Picture below, Proton Persona front with disc brake.

Factory stock rubber brake hose of the Proton Persona tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

Proton Persona front rubber brake hose replaced with the steel braided one from SUPERCIRCUIT (picture below). The steel braided brake hose provide immediate braking response. It is firmer and the braking will not fade under severe braking conditions. The Teflon inner hose is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

The Proton Persona comes in two variants, one with the rear drum brakes and the other variant with rear disc brakes. The brake hoses are not commonized and can't inter-swap with each other. The Proton Persona rear drum brakes variant is shown below.

The Proton Persona rear drum brake fitted with SuperCircuit Steel braided brake hose shown below. Steel braided brake hoses are more resistant to brake fading.

All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Proton Persona steel braided brake lines, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.