Ford Fiesta Steel Braided Brake Lines

Better braking and be able to stop in time is an important safety issue. There are many ways to improving the braking performance from brake pads, brake discs to better tires and of course steel braided brake hoses play important role in bringing the car to stop!

SUPERCIRCUIT has the Steel Breided Brake Hoses for the 6th generation Ford Fiesta 1.6 (2008~ ). Here are the photos before and after the installation:

The front brake hose of the Ford Fiesta shown below after the front wheel is removed. 

The factory stock front braking system of the 6th generation Ford Fiesta comes with rubber brake hoses. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance.

We replaced the Ford Fiesta factory stock rubber brake hoses to steel braided brake hoses from SUPERCIRCUIT. 

The SUPERCIRCUIT steel braided brake hoses are more resistant to brake fading especially under hard braking conditions and when the brake fluid is boiling e.g. high speed continuous braking, downhill etc. Thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

For optimum braking performance, not to forget there are brake hoses at the rear wheels too. The rear brake hoses can be access easily after removing the rear wheels (SEE BELOW).

We replaced both the left and right rear wheel's original rubber brake hoses to the USA Engineered SUPERCIRCUIT Steel Braided ones.

All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Ford Fiesta. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To purchase or for more information about the above 6th Generation Ford Fiesta (2008~ ) steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Ford Fiesta 1.5 Steel Braided Brake Lines

The steel braided brake hoses made for the 6th generation Ford Fiesta (2008 onwards) by SUPERCIRCUIT is installed to the Ford Fiesta 1.5 below.

Firstly, the Ford Fiesta front wheels have to be removed to access to the front stock rubber brake hoses.

The original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty. The Ford Fiesta factory stock front rubber brake hose shown below. 

Close up picture of the brackets and fitting at the at the front shock absorber (BELOW PICTURE), it is important to have this bracket to hold the brake hose in place, not to rub against any moving components during steering turns or shock absorber's movements.

The SUPERCIRCUIT steel braided brake hose installed to the Ford Fiesta front braking system. SUPERCIRCUIT Steel Braided Brake Lines are engineered and designed as close as possible to the OEM standard. 

Note the holding bracket at the middle of the SUPERCIRCUIT steel brake hose is 100% compatible with the factory suspension system. We replaced it with an OEM compatible fitting, no hanging and dangling (SEE BELOW CLOSE UP PICTURE).

Front braking system is important, but not to miss out the rear. The Ford Fiesta rear brake system with drum brakes (BELOW).

The factory stock rubber brake hoses can be easily found after the rear wheels of the Ford Fiesta is removed (SEE BELOW).

Replacing the Ford Fiesta's rear rubber brake hoses to the SUPERCIRCUIT Steel Braided Brake Hoses for even better braking performance.

SUPERCIRCUIT steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it also comes with Lifetime Warranty*. 

To purchase or for more information regarding the 6th generation Ford Fiesta SUPERCIRCUIT Steel Braided Brake Line Kit, please contact us at SS13 SUBANG JAYA INDUSTRIAL ESTATE. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.