BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, April 9, 2016

Ford Fiesta Steel Braided Brake Lines

Better braking and be able to stop in time is an important safety issue. There are many ways to improving the braking performance from brake pads, brake discs to better tires and of course steel braided brake hoses play important role in bringing the car to stop!

SUPERCIRCUIT has the Steel Breided Brake Hoses for the 6th generation Ford Fiesta 1.6 (2008~ ). Here are the photos before and after the installation:



The front brake hose of the Ford Fiesta shown below after the front wheel is removed. 


The factory stock front braking system of the 6th generation Ford Fiesta comes with rubber brake hoses. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance.


We replaced the Ford Fiesta factory stock rubber brake hoses to steel braided brake hoses from SUPERCIRCUIT. 

The SUPERCIRCUIT steel braided brake hoses are more resistant to brake fading especially under hard braking conditions and when the brake fluid is boiling e.g. high speed continuous braking, downhill etc. Thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.


For optimum braking performance, not to forget there are brake hoses at the rear wheels too. The rear brake hoses can be access easily after removing the rear wheels (SEE BELOW).



We replaced both the left and right rear wheel's original rubber brake hoses to the USA Engineered SUPERCIRCUIT Steel Braided ones.


All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Ford Fiesta. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.


SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To purchase or for more information about the above 6th Generation Ford Fiesta (2008~ ) steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

No comments:

Post a Comment