Toyota 86 Steel Braided Brake Lines

Better braking and be able to stop in time is an important safety issue. There are many ways to improving the braking performance from brake pads, brake discs to better tires and of course steel braided brake hoses play important role in bringing the car to stop!

Here is yet another Toyota 86 installed the SUPERCIRCUIT Steel Braided Brake Lines to further improving the braking performance.

Firstly, remove the front wheels to get access to the brake lines.

The below picture shows the factory stock rubber brake hose of the Toyota 86 front braking system. Occasionally, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminates the brake fluid. Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface and affect the braking performance.

We replaced the Toyota 86 front rubber brake hose with the SUPERCIRCUIT steel braided brake hose (SEE BELOW PICTURE). The steel braided brake hose is made according to the original size and fitting, just a lot better in braking performance thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

For optimum braking performance, do not miss out the rear brake hoses. The rear brake hoses can be access easily after removing the rear wheels (SEE BELOW).

We replaced all the original rubber brake hoses of the Toyota 86 (SEE BELOW) to the steel braided brake hoses. All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Toyota 86. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To purchase or for more information about the above Toyota 86/ GT86/ FT86 steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or visit our SuperCircuit Steel Braided Brake Lines Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota 86 Steel Braided Brake Lines

Better braking and be able to stop in time is an important safety issue. There are many ways to improving the braking performance from brake pads, brake discs to better tires and of course steel braided brake hoses play important role in bringing the car to stop!

We have installed the SUPERCIRCUIT Steel Braided Brake Lines to the Toyota 86 below:

Below picture, the front braking system of the Toyota 86 after the wheel is removed.

This is the factory stock rubber brake hose of the Toyota 86 front braking system. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance.

We replaced the Toyota 86 front rubber brake hose with the SUPERCIRCUIT steel braided brake hose (SEE BELOW PICTURE). The steel braided brake hose is made according to the original size and fitting, just a lot better in braking performance thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

For optimum braking performance, not to forget there are brake hoses at the rear wheels too. The rear brake hoses can be access easily after removing the rear wheels (SEE BELOW).

We replaced both the left and right rear wheel's original rubber brake hoses of the Toyota 86 (SEE BELOW) to the USA Engineered SUPERCIRCUIT Steel Braided ones.

All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Toyota 86. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To purchase or for more information about the above Toyota 86/ GT86/ FT86 steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or visit our SuperCircuit Steel Braided Brake Lines Facebook Page for more updates and information on the brake lines.

* T&C Applies.