Better braking and be able to stop in time is an important safety matter. There are many ways to improving the braking performance from brake pads, brake rotors to better tires and of course steel braided brake hoses play important role in bringing the car to a stand still!
Just like the below Mitsubishi Lancer 2.0 (model year 2007-present), with the upgraded brake rotors, but it is not complete without the steel braided brake hoses.
The Mitsubishi Lancer front wheels are removed to access to the front rubber brake hoses (SEE BELOW).
The factory fitted Mitsubishi Lancer front rubber brake hoses shown in the picture below. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance.
Replaced the Mitsubishi Lancer front rubber brake hose with the SUPERCIRCUIT Steel Braided Brake Hose for better and more responsive braking performance. Thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking so the full hydraulic pressure can be transmitted to the brake caliper faster and hence shorten the response time.
Please note there are 4 pieces of brake hoses at the rear of the Mitsubishi Lancer. The first two are at the trailing arm and the other two are near the rear rotors. In order to obtain optimum braking performance, all the rubber brake hoses are to be replaced with the steel braided ones from SUPERCIRCUIT.
This is the rubber brake hose at the rear trailing arm of the Mitsubishi Lancer (SEE BELOW) and after it is being replaced by the steel braided one from SUPERCIRCUIT.
This is the rubber brake hose near the rear rotor and after the SUPERCIRCUIT Steel
Braided Brake Hose is installed (SEE BELOW).
All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Mitsubishi Lancer 2.0 (CY2A-CZ4A, 2007-present). The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.
SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*.
To purchase or for more information about the above steel braided brake hoses kit made for the Mitsubishi Lancer 2.0, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.
* T&C Applies.
