Volkswagen Jetta (A6) Steel Braided Brake Lines

The SUPERCIRCUIT Steel Braided Brake Lines installed to the 2010-2018 Volkswagen Jetta (A6) below are designed for better braking response and to improve the stopping performance of the vehicle.

<AT THE FRONT>

The Volkswagen Jetta (A6) factory supplied rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking, hence delayed the braking response.

To counter the shortfall of the rubber brake hoses, the SUPERCIRCUIT Teflon core with braided stainless steel around it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! 

The original rubber brake hose on the front of the VW Jetta is shown below. It is removed carefully and then replaced It is replaced with the SUPERCIRCUIT Steel Braided Brake Hose (picture further below) for better braking response and stopping performance.

<AT THE REAR>

The VW Jetta (A6) featured here comes with original drum brakes (spec. might differ depending on countries), the rear braking system is equally important and not to be missed out too!

The original Volkswagen Jetta (A6) rear rubber brake hoses are to be replaced with the high performance SUPERCIRCUIT Steel Braided Brake Hoses which is shown in the picture further down below.

SUPERCIRCUIT steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.).

To order or for more information about the above SUPERCIRCUIT Steel Braided Brake Line Kit specially developed for the VW Jetta A6 (2010-2018) shown above, please call us at Tel: 03 5632 2855 or write us a message on the SUPERCIRCUIT Steel Braided Brake lines Facebook Page.