We have a very good Dos and Don'ts example with this custom made Alfa Romeo steel braided brake lines to we did today.
The Alfa Romeo 156 came to SUPERCIRCUIT for a set of custom made front steel braided brake hoses because the front calipers are modified and it was installed with a set of custom made steel braided brake hose by the previous owener. We inspected the brake hoses thoroughly and this is what the findings are:
The exposed steel braided brake hoses at the fitting increases the risk of exposure to contamination due to the elements.
The wrongly calculated brake hose length causes it to rub against the vehicle body. A good set of brake hose should have enough clearance and not rubbing against anything.
The wrongly calculated brake hose length also causes it to rub against the caliper bracket. This is cause excessive wear and tear in long run. The SUPERCIRCUIT steel braided brake hoses length is carefully measured with steering wheel movements and absorber movements are being taken into account.
The good set of steel braided brake hose should be clear from any moving component, so to reduce the risk of wear and tear.
All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Alfa Romeo 156. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.
SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*.
For more information about the above tailor made steel braided brake line kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.
* T&C Applies.
No comments:
Post a Comment