Mazda RX-8 Steel Braided Brake Line Kit Installed

Below are the photos of the SuperCircuit Steel Braided Brake Hoses installed to the Mazda RX-8:

Mazda RX-8 front wheel is removed to get access to the front brake hose. 

Mazda RX-8 factory stock rubber brake hose shown above. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

The SuperCircuit steel braided brake hose is installed to the front of the Mazda RX-8 front wheel (pic. above). Steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.

Mazda RX-8 rear wheel removed.

The Mazda RX-8 rear rubber brake hose shown above. 

Steel braided brake lines will help to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.