Toyota Estima ACR30 Steel Braided Brake Line Kit

We have just installed a set of SUPERCIRCUIT Steel Braided Brake Line Kit to the Toyota Estima ACR30 (model year 2000-2005).

For cars with such age, it is time to check the original brake hoses for any faulty.

Stock factory fitted rubber brake hose tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

Here is how the Toyota Estima ACR30 front stock rubber brake hose looks like.

The Toyota Estima ACR30 front rubber brake hose replaced with the steel braided one from SUPERCIRCUIT (picture below). The steel braided brake hose provide immediate braking response. It is firmer and the braking will not fade under severe braking conditions.

You will find a total of 4 pieces of rubber brake hose at the rear of the Toyota Estima. So it makes up a total of 6 pieces for all the four wheels. Make sure you don't miss out any one of them when replacing the brake hoses.

There is one rubber brake hose each on left and right side of the rear axle of the Toyota Estima ACR30.

Then, there is a rubber brake hose near the rear brake disc, one on each side of the rear Estima brake disc (see below picture). We replaced it with the SUPERCIRCUIT Steel Braided Brake Hoses.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Toyota Estima ACR30 or MCR30 steel braided brake lines, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota Hilux (Single Cab) Steel Braided Brake Line Kit

SUPERCIRCUIT Steel Braided Brake Line Kit now available for the Toyota Hilux Vigo Single Cab at SuperCircuit Exhaust Pro Shop.

Steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose. It is just nice for the performance upgraded commonrail diesel trucks or an everyday workhorse like the Hilux single cab below.

Picture below, the front factory fitted brake hose of the Toyota Hilux replaced with the SUPERCIRCUIT Steel Braided Brake Hose.

A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions e.g. overheating brake fluid. It is a must for the 4X4 and off road enthusiasts.

There is only one rubber brake hose at the rear of the Toyota Hilux (see below picture). We replaced it with the steel braided brake hose too! We can also custom made the whole steel braided brake hose length according to the vehicle height, if your 4WD is lifted for instance. 

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Nissan Sylphy (G11) Steel Braided Brake Hoses

Here at SUPERCIRCUIT STEEL BRAIDED BRAKE LINES SHOP, we do not only produce and distribute the steel braided brake hoses, we also installed them for the customers. Having our hands on the products that we produced, we get to know the SUPERCIRCUIT brake hoses better as well as the feedback from each and every car model that we have installed.

We have the SUPERCIRCUIT STEEL BRAIDED BRAKE HOSE KIT for the second generation Nissan Sylphy (G11, model year 2005-2012) installed.

The Nissan Sylphy front disc brake with the factory stock rubber brake hose shown below.

We replace the Nissan Sylphy factory stock rubber brake hose with the SUPERCIRCUIT steel braided brake hose for superior braking performance and much improved brake response.

Nissan Sylphy with drum brakes at the rear (picture below) also comes with factory fitted rubber brake hoses.

Nothing is wrong with the rubber brake hoses, just the rubber will have the tendency to absorb moisture and the moisture has the possibility to go into the brake fluid systems through rubber brake hoses and contaminate brake fluid. Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

So we replaced the Nissan Sylphy rear rubber brake hoses with a set of steel braided brake hoses from SUPERCIRCUIT.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above Nissan Sylphy G11 (2005-2010) steel braided brake line kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Mitsubishi Pajero Steel Braided Brake Line Kit

Here at SUPERCIRCUIT Steel Braided Brake Lines, we can custom made a set of steel braided brake line kit to your request just like the below 1st generation Mitsubishi Pajero (1982-1991).

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Especially for cars at this age like the 1st generation Pajero.

There are 6 pieces of brake hoses all around this 1st generation Pajero. We replaced every single brake hose to steel braided one (as shown below). 

Most of the rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture below.

The rear brake system of the 1st generation Mitsubishi Pajero is shown below. There are 4 pieces of brake hoses for the rear system. We replaced all of them with the USA ENGINEERED Steel Braided Brake Hoses from SUPERCIRCUIT.

All the SUPERCIRCUIT made steel braided brake lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with LIFETIME WARRANTY!*

For more information about the SUPERCIRCUIT STEEL BRAIDED BRAKE LINES customization, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook for more updates.

* T&C applies.

Subaru Impreza GR Hatchback (non-Brembo) Steel Braided Brake Line Kit

If your Subaru Impreza Hatchback (GR) STI widebody version is the base model and doesn't come with the Brembo brake calipers. No worries, you still can improve the braking performance with a set of steel braided brake hoses from SuperCircuit!

<FRONT>

The original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

SuperCircuit Steel Braided Brake Hose installed to the front of the Subaru Impreza hatchback, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a high performance model.

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. No hanging and dangling here.

<REAR>

Note the holding bracket at the middle of the SuperCircuit steel brake hose is 100% compatible with the factory suspension system. No hanging and dangling means maximum safety and durability is ensured.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Kia Optima (MG) Steel Braided Brake Line Kit

We have installed quite a few numbers of SUPERCIRCUIT Steel Braided Brake Line Kit to the Kia Optima K5. Here is the second generation Kia Optima MG (model year 2005-2010).

<Kia Optima MG Front Brake Hose Installation>

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface. Kia Optima MG front rubber brake hose shown below:

SUPERCIRCUIT steel braided brake hose installed to the Kia Optima MG below:

<Kia Optima MG Rear Brake Hose Installation>

The factory fitted rubber brake hose of the Kia Optima GM shown below:

SUPERCIRUCIT Steel Braided Brake Line Kit is designed to be 100% OEM compatible with the Kia Optima GM rear braking system.

The SuperCircuit steel braided brake line kit for the second generation Kia Optima (MG) is made with TEFLON inner core, steel braided middle layer and then poly-coated outer layer for maximum durability and safety under harsh conditions. 

For every piece of SuperCircuit steel braided brake hose is tested at 3000psi to ensure flawless product (most car booster-assisted braking system or master pump can reach pressures of approximately 1500psi).

For more information, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Subaru Impreza WRX STI 4-door Sedan (GV) Steel Braided Brake Line Kit

We have installed a set of SuperCircuit Steel Braided Brake Line Kit to the Subaru Impreza WRX STI 4-door Sedan (GV) which comes with the STI Brembo calipers.

The Subaru Impreza WRX STI original brake hoses are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

The Subaru Impreza WRX STI front factory fitted rubber brake hose shown below.

SuperCircuit Steel Braided Brake Hose installed to the front of the Subaru Impreza WRX STI sedan, replacing the factory fitted rubber brake hose, for firmer and more immediate brake response hence reduce braking distance during emergency braking. This is especially important for such a high performance model.

Equally important is the rear braking system of this Subaru Impreza WRX STI sedan. We replaced the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

Steel braided brake hoses are more resistant to brake fading. All SuperCircuit Steel Braided Brake Hose fittings are 100% compatible with the factory stock braking system and Brembo calipers.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.