BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, March 19, 2016

Audi Q7 Steel Braided Brake Lines

It takes a lot of effort to slow down this gigantic machine while travelling at high speed, not to mention to bring it to a stand still. One of the very important components in the stopping of the Audi Q7 is the brake hoses.


A part of the stock original front brake hose of the Audi Q7 shown below. The stock brake hose is made of rubber. In most cases, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance.


We replaced all the Audi Q7 rubber brake hoses to the steel braided one from SUPERCIRCUIT. The SUPERCIRCUIT steel braided brake hoses are more resistant to brake fading especially under hard braking conditions and when the brake fluid is boiling e.g. high speed continuous braking, downhill etc. Thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.

A close-up look at the fittings. For safety reasons, all SUPERCIRCUIT steel braided brake lines are OEM compatible, no modification on the fittings, brackets or calipers are required.

This is the rear rubber brake hose of the Audi Q7, originally wrapped in metal coil.


This is the 3-layer steel braided brake hose from SUPERCIRCUIT installed to the rear right hand side of the Audi Q7. 


All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Audi Q7. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.


SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To purchase or for more information about the above Audi Q7 steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.