Renault Megane RS 265 Steel Braided Brake Line Kit

The SUPERCIRCUIT Steel Braided Brake Line Kit made for the Renault Magane RS, improves the braking performance of this high performance hatchback significantly.

This Steel Braided Brake Line Kit is 100% street legal, compliant to the strictest requirement in the USA, suitable for dynamic driving and competition!

Here is another Renault Megane R.S. 265 installed with the SUPERCIRCUIT steel braided brake hoses:

<FRONT>

The Renault Megane R.S. 264 front braking system with red Brembo calipers. The factory supplied rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking, hence delayed the braking response.

The Teflon core and surrounded with stainless steel braided brake hose does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! 

The front rubber brake hose (above) of the Renault Megane R.S. 265 is replaced with the SUPERCIRCUIT steel braided brake hose (below).

<REAR>

Not to be missed out, the rear of the Renault Megane R.S. 265 also comes with two short rubber brake hoses connecting the car body and the rear braking system. 

Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. So, please check your rubber brake hoses frequently or to change it to the very long lasting SUPERCIRCUIT steel braided brake line kit.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

For more information about the above SUPERCIRCUIT steel braided brake line kit for the Renault Megane R.S. 265, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Toyota Harrier XU30 Steel Braided Brake Line Kit

The SUPERCIRCUIT Steel Braided Brake Line Kit for the 2nd generation Toyota Harrier (XU30, 2003-2008).

The stainless steel braided brake lines improve your braking performance with a quicker, firmer and consistent pedal response over a wide range of driving conditions.

<TOYOTA HARRIER FRONT BRAKE HOSE>

Factory stock rubber brake hose of the Toyota Harrier (above) tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently.

SUPERCIRCUIT Steel Braided Brake Hose installed to the Toyota Harrier front brake system (below). The SUPERCIRCUIT steel braided brake hoses are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses.

<TOYOTA HARRIER REAR BRAKE HOSE>

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc.

SUPERCIRCUIT Steel Braided Brake hose installed to the rear of Toyota Harrier (below), all fittings are 100% OEM compatible. Just plug 'n play, no further modification required.

All the SUPERCIRCUIT made steel braided brake lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with LIFETIME WARRANTY!*

For more information about the above Toyota Harrier SUPERCIRCUIT STEEL BRAIDED BRAKE LINES, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook for more updates.

* T&C applies.