BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Friday, May 16, 2014

Mazda BT-50 Steel Braided Brake Line Kit

The full front and rear steel braided brake line kit from SuperCircuit installed to the Mazda BT-50 below.

<INSTALLING THE FRONT MAZDA BT-50 BRAKE HOSE>

Replacing the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess. The steel braided brake hoses provide firmer and more immediate brake response to your Mazda BT-50 braking performance.


Mazda BT-50 front factory stock rubber brake hose shown below.

Mazda BT-50 stock rubber brake hose and fitting.


All SuperCircuit steel braided brake line fittings are engineered in the USA with stringent quality control to ensure top safety.

Mazda BT-50 front brake with SuperCircuit steel braided brake hose installed (see below). The SuperCircuit steel braided brake line kits are 100% OEM compatible and fits nicely to the factory stock brackets. 


SuperCircuit steel braided brake line fittings for the Mazda BT-50 front brake shown below.

 


 <INSTALLING THE REAR MAZDA BT-50 BRAKE HOSE>

You can find the two rear brake hoses of the Mazda BT-50 above the rear axle as shown in the photo below.


SuperCircuit steel braided brake hoses installed to the rear of Mazda BT-50 below.



SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Mazda BT-50 steel braided brake hose kit, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Thursday, May 15, 2014

Mazda Lantis Steel Brake Hoses

The SuperCircuit Steel Braided Brake Line Kit installed to the Mazda Lantis (model year 1993-1996, CB platform) 5-door hatchback.


The SuperCircuit Stainless steel braided brake lines improve your braking performance with a quicker, firmer and consistent pedal response over a wide range of driving conditions.

They are engineered in the USA and are 100% street legal and compliant to the strictest requirement in the USA. Suitable for dynamic driving and competition!


<MAZDA LANTIS FRONT WHEEL>

The stock rubber brake hoses have the possibility to absorb moisture and contaminate the brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. That's why the steel braided brake hoses come into the picture.





SuperCircuit steel braided brake lines are with Teflon inner core which doesn't absorb moisture and very corrosive resistance, hence minimizes the weakness of the rubber brake hoses. SuperCircuit steel braided brake hose installed to the Mazda Lantis front (below).



<MAZDA LANTIS FRONT WHEEL>

The factory stock breke hose for the rear of Mazda Lantis is made with rubber. The average life of the rubber brake hoses is 5-6 years, so it is better to check the condition of the rubber brake hose after a while, look for symptom such as swelling, cracks, chafing etc., before it is too late.




A layer of stainless steel woven material surrounding the Teflon core is preventing the brake hose from expanding under hot and boiling conditions. Hence, providing faster and more consistent braking response under all conditions especially under the overheating brake fluid conditions.


SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information about the Mazda Lantis steel braided brake hoses, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.




* T&C applies.

Saturday, May 3, 2014

Replacing the Mitsubishi Triton 2.5D Brake Hoses

Below are the photos of the stock rubber brake hoses of the Mitsubishi Triton 2.5D (model year 2006-present or called L200 in some countries), and then replaced with the SuperCircuit steel braided brake hoses.

The SuperCircuit steel braided brake line kit for the Mitsubishi Triton 2.5D comes with all four pieces of steel brake hose. Two for the front disc brakes and two for the rear drum brakes setup.

<FRONT RUBBER BRAKE HOSE>
Taking the front right wheel of the Mitsubishi Triton off, you will find the scene below - the rubber brake hose is unveiled.  


You will find the factory stock Mitsubishi Triton banjo fitting on the caliper side....

Along the rubber brake hose, you will see the centre fitting of the front rubber brake hose. This centre fitting is hooked onto a metal L-shaped bracket on the Mitsubishi Triton front shock absorber.

At the top end, it is a female fitting connecting to the metal brake line on the vehicle body.

<FRONT STEEL BRAKE HOSE>
Then, here comes the SuperCircuit steel braided brake hose installed to the front right hand side of the vehicle.


From bottom to the top, the BANJO FITTING at the caliper side. Note the two copper washer, used on each side of the banjo fitting, to seal off the brake fluid from leaking. A must and very important component during the installation process. 

CENTRE FITTING is replace with rubber. Rubber fitting holds the steel braided brake hose in position, does not cause abrasion to the brake hose and prevents the brake hose from rubbing against moving components such as shock absorber, upper & lower arm, turning tyre, etc.


At the top end, it is a FEMALE FITTING connecting to the metal brake line on the vehicle body. All components from SuperCircuit Steel Braided Brake Line Kit are designed to be able to stragith bolt-on, 100% OEM compatible.

<REAR STEEL BRAKE HOSES>
Replacing the rear brake hoses to SuperCircuit steel braided ones for the Mitsubishi Triton 2.5D is quite straight forward. Both the brake hoses are located at the left hand side of the rear axle.

Proper bleeding is required after the whole installation process above. Please seek professional advise if required.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.


* T&C applies.