BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, November 30, 2013

Ford Ranger 3.2D (T6) SuperCircuit Steel Braided Brake Line Kit

SUPERCIRCUIT Steel Braided Brake Line Kit for Ford Ranger 3.2D (T6) is now available through SuperCircuit Exhaust Pro Shop or its authorized dealers nationwide.




<FORD RANGER FRONT BRAKE HOSES>

Stock front brake hoses of the Ford Ranger are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.


The factory stock front rubber brake hose of the Ford Ranger show below. 


Ford Ranger factory stock front rubber brake hoses are changed to steel braided ones from SUPERCIRCUIT. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.




<FORD RANGER REAR BRAKE HOSES>


Replaced with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a heavy and big size truck.





SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Thursday, November 14, 2013

Volkswagen Passat B6 Steel Braided Brake Line Kit

The SuperCircuit Steel Braided Brake Line Kit for Volkswagen Passat (B6, model year 2005-2010) is now available from SuperCircuit or its authorized dealers.


It is an important part of the whole braking system which contributes significant braking performance. Even after you have upgraded to a better rotors, be it slotted or cross drilled, or even you have a set of high performance brake pads, without a set of good steel braided brake lines, you don't get the full out of your braking system!

The original factory VW Passat stock brake hose is made of rubber. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Secondly, rubber hose tends to expand under high temperature, hence reducing the braking response and delaying the brake fluid pressure to arrive at the brake calipers.

<REPLACING FRONT BRAKE HOSES>
The SuperCircuit steel braided brake hose is made with TEFLON core which is able to withstand high temperature, covered with stainless steel braided middle layer to eliminate the expansion, lastly the outer layer is covered with PVC material to protect the brake hose from substances.



<REPLACING FRONT BRAKE HOSES>
Replacing the factory stock rubber brake hoses with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.