BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, December 21, 2013

Honda Civic EG Steel Braided Brake Line Kit

To further improve the braking performance of your Honda Civic EG, upgrade the Honda Civic EG brake hose to steel braided one!

SuperCircuit Steel Braided Brake Line Kit for Honda Civic EG is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.

<HONDA CIVIC EG FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Honda Civic EG are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.




Honda Civic EG factory rubber brake hose shown below. Please note that this Honda Civic EG is fiited with aftermarket shock absorber which doesn't come with the brake hose bracket holder, so it uses cable tie to hold the rubber brake hose in place which is not commendable and has the risk of brake failure if the cable ties break off.

Honda Civic EG steel brake hose installed. The SuperCircuit steel braided brake line kit is 100% compatible with the OEM suspension system and comes with the mounting brackets. So please select and install compatible aftermarket shock absorbers/ coil overs which has the compatible brake hose brackets next time you change your shocks.


<HONDA CIVIC EG REAR BRAKE HOSES>

Equally important at rear. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Honda Civic EK Steel Braided Brake Line Kit

To further improve the braking performance of your sporty Honda Civic EK 3-door hot hatch, use steel braided brake hoses.

SuperCircuit Steel Braided Brake Line Kit for Honda Civic EK (3-door) is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.


<HONDA CIVIC EK FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Honda Civic EK are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

SuperCircuit Steel Braided Brake Line Kit is 100% compatible with the factory stock braking system and shock suspension system. So everything is installed and tighten to the original location to avoid mishandling and minimize the risk of brake failure e.g. the bracket is included in the middle of the SuperCircuit steel braided brake hose, so you can fasten it to the brake hose holder like original.

The SuperCircuit Steel Braided Brake Hose for Honda Civic EK front braking system is tighten and secured to the factory original brake hose braket, no rubbing against any moving component here. Safe and sound!


<HONDA CIVIC EK REAR BRAKE HOSES>

Equally important at rear. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

Honda Civic EK rear rubber brake hose shown below.

Honda Civic EK rear steel brake hose installed.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Wednesday, December 18, 2013

Honda Civic Type-R Steel Braided Brake Line Kit

The Honda Civic FD2 Type-R comes with Brembo 4-pot calipers in the front as standard, to further improve the braking performance of the Honda Civic Type-R (FD2R), one of the options is to go for SuperCircuit Steel Braided Brake Lines!



<HONDA CIVIC TYPE-R FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.


Stock front brake hoses of the Honda Civic Type-R are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.


Factory stock rubber brake hose of the Honda Civic FD2R shown below:

SuperCircuit Steel Braided Brake Hose installed to the front of the Honda Civic Type R. All fittings are 100% compatible with the factory stock braking system for maximum safety and reliability:

<HONDA CIVIC TYPE-R REAR BRAKE HOSES>


Equally important at rear. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.