BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, June 29, 2013

Steel Braided Brake Hose for Mazda BT-50 (2011-present)

We have the steel braided brake line kit for the new Mazda BT-50. Below are the installation scene:

Mazda BT-50 front steel brake hose replacement in progress.....

Mazda BT-50 front rubber brake hose. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Mazda BT-50 front steel braided brake hose by SuperCircuit installed. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.


Mazda BT-50 rear spare wheel is removed to access to the rear braking system.

Stock rubber brake hoses for Mazda BT-50 rear side.

Steel Braided Brake Lines for Mazda BT-50 rear side.
Replaced with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.



* T&C applies.



Friday, June 28, 2013

Audi Q7 Steel Braided Brake Line Kit

We have produced the steel brake hose kit for Audi Q7 and installed.

The front wheel is removed to access to the brake hose.

The stock rubber brake hose is unveiled. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

The SuperCircuit steel braided brake hose is installed to the front of the Audi Q7.



Steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.

Now, it is the rear wheels.



When all the SuperCircuit steel brake hoses are installed, proper bleeding to the braking system will be performed to ensure there is no air trapped inside the steel brake hoses.

Steel braided brake lines will help to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.



* T&C applies.

Wednesday, June 19, 2013

Mazda RX-8 Steel Braided Brake Line Kit Installed

Below are the photos of the SuperCircuit Steel Braided Brake Hoses installed to the Mazda RX-8:
Mazda RX-8 front wheel is removed to get access to the front brake hose. 

Mazda RX-8 factory stock rubber brake hose shown above. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

The SuperCircuit steel braided brake hose is installed to the front of the Mazda RX-8 front wheel (pic. above). Steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.

Mazda RX-8 rear wheel removed.

The Mazda RX-8 rear rubber brake hose shown above. 

Steel braided brake lines will help to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.


* T&C applies.