BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Monday, March 11, 2013

Proton Persona Steel Braided Brake Line Kit

SuperCircuit has the steel braided brake line kit for Proton Persona.

Below is the installation scene:


Firstly, the front wheel is removed to get access to the factory rubber brake hose.

The Proton Persona's original factory fitted front rubber brake hose above. Factory fitted stock rubber brake hose will have an average life of six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.

Rear wheel is removed to get access to the rear rubber brake hoses.  

Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface.

For every piece of steel braided brake hose produced by SuperCircuit, it is tested to 3000psi to ensure flawless product.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Tuesday, March 5, 2013

Steel Braided Brake Line Kit for Suzuki Vitara

SuperCircuit Steel Braided Brake Line Kit for Suzuki Vitara (also known as Suzuki Escudo in some countries) model year 1989-2006.


Steel braided brake hose installation for the front wheel in progress.... 

 
SuperCircuit steel braided brake hose installed to the front. SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.

Steel braided brake hose installation for the rear of Suzuki Vitara in progress....


 


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies..


Mitsubishi Lancer Steel Braided Brake Line Kit

We have the steel braided brake line kit for Mitsubishi Lancer (CJ). SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.


The Lancer front wheel is removed.... 

..to unveil the factory stock rubber brake hose.    

 
Mitsubishi Lancer front is installed with the SuperCircuit steel braided brake hose.

It is turn to upgrade the rear braking system of the Lancer from rubber to stainless steel brake hose. There are four piece of rubber brake hose at the rear part of the Mitsubishi Lancer.

This is the rear most rubber brake hose shown above.

Replaced with stainless steel braided brake line. 

The above shown the rubber brake hose at the rear middle of the Mitsubishi Lancer. 

Also been replaced with steel braided brake line, to get the maximum out of the steel braided brake lines.

For every piece of SuperCircuit steel braided brake hose, it is tested at 3000psi to ensure flawless product (most car booster-assisted braking system or master pump can reach pressures of approximately 1800psi).

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Proton Waja Steel Braided Brake Line Kit

If you would like to improve the braking performance of your Proton Waja, the steel braided brake hose is available from SuperCircuit.


Front brake hose installation in progress:

Proton Waja stock rubber brake hose shown above. Factory stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

SuperCircuit steel braided brake hose installed to the Waja front wheel. 

Proton rear wheel is removed. 

Proton Waja factory fitted rubber brake hose shown above. 

SuperCircuit steel braided brake hose installed to the Proton Waja rear wheel.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. Best of all, it comes with lifetime warranty*.

For every piece of SuperCircuit steel braided brake hose, it is tested at 3000psi to ensure flawless product (most car booster-assisted braking system or master pump can reach pressures of approximately 1500psi).

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.