BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Monday, October 29, 2012

Proton Inspira Steel Braided Brake Line Kit

SuperCircuit steel braided brake line kit for Proton Inspira, will also fit Mitsubishi Lancer 2.0.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i., best of all, it comes with lifetime warranty*.



Front Proton Inspira brake system....

Factory fitted stock rubber brake hose will have an average life of six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

 SuperCircuit steel braided brake hose, with Teflon inner hose, wrapped by stainless steel braided middle section and then coated with PVC, minimized the weakness of the rubber brake hose.

Do you know that your Proton Inspira/ Mitsubishi Lancer has 6 sections of rubber brake hose around? Each 1 piece for the front wheels, and 2 pieces for the rear left and rear right wheels respectively.

Proton Inspira/ Mitsubishi Lancer rear brake system comes in 2 sections. This is the 1st section of the stock factory fitted rear rubber brake hose.

Many has omitted this middle brake hose section which located just behind the rear axle. These rubber brake hoses will also has the possibility of contribute to the braking failure and should not be omitted.

 .... installed with SuperCircuit steel braided brake line.

The 2nd section of the Proton Inspira/ Mitsubishi Lancer rear brake system system....

Fitted with SuperCircuit steel braided brake line for consistent braking performance and more responsive brake pedal response under wide range of situation e.g. rainy days panic braking, continuously down hill braking etc.

For more information, please contact SuperCircuit Exhaust Pro Shop. Tel: +6 03 5632 2855 or 'like' us in the Facebook.


Saturday, October 27, 2012

Perodua Myvi 1.3 (2005-2011) Steel Braided Brake Line Kit

Perodua Myvi 1.3 (First Generation 2005-2011) installed with SuperCircuit Steel Braided Brake Line Kit for consistent braking performance and more responsive brake pedal response under wide range of situation e.g. rainy days panic braking, continuously down hill braking etc.

 

First generation Perodua Myvi 1.3 front brake system....

Stock standard factory fitted rubber hose....

Replaced by SuperCircuit steel braided brake line for better braking performance.

Perodua Myvi 1.3 rear braking system.

Fitted with stock rubber brake hose....

Braking performance will be improved after the SuperCircuit steel braided brake line is installed.

For more information and installation, please contact SuperCircuit Exhaust Pro Shop or 'like' us on Facebook.  Tel: +6 03 5637 2855/ 5632 2855






Tuesday, October 23, 2012

Proton Satria Neo Steel Braided Brake Line Kit

SuperCircuit steel braided brake line kit for Satria Neo.



Satria Neo front brake system with factory fitted rubber brake hoses will be replaced with SuperCircuit steel braided brake lines....

 Front stock factory fitted rubber brake hose....

SuperCircuit steel braided brake line kit for Satria Neo for better responsive brake pedal, consistent braking performance and many more advantages over the rubber brake hoses..... you have to experience it yourself.

Installation in progress for rear brake system...

Stock factory fitted rubber brake hose tends to deteriorate through expansion and moisture, especially under high operating temperatures; it will also swell with age and restrict brake fluid flow. So, inspect your rubber brake hoses frequently. 


For purchase and installation services, please contact SuperCircuit Exhaust Pro Shop, Sunway. Tel: 03 5632 2855/ 5637 2855 or join us in Facebook.

Friday, October 19, 2012

Volkswagen Scirocco Steel Braided Brake Line Kit

Installed the SuperCircuit steel braided brake line kit to the Volkswagen Scirocco 2.0.


 VW Scirocco front stock factory fitted rubber brake hose will be replaced....

Stock rubber brake hose will be replaced with the TEFLON cored, stainless steel braided brake line from SuperCircuit.....

SuperCircuit steel braided brake lines for more responsive brake pedal response, consistent braking performance and many more advantages over the rubber brake hoses..... you have to experience it yourself.

SuperCircuit steel braided brake line kit comes in 4 pieces, for all around braking performance.

VW Scirocco stock standard factory fitted rear rubber brake hose here....

... being replaced by SuperCircuit steel braided brake hose! Direct replacement, no modification required.

For more information, please contact SuperCircuit Exhaust Pro Shop. Tel: +6 03 5632 2855 or join us on Facebook.